|
|
All Tags » tech ( RSS)
-
|
I recently had an opportunity to dyno the ole 4.6 3v Fox-bodied Fairmont . I felt like it was time to go ahead and make some pulls with it, since the car had racked up some street miles and all the bugs had been worked out. I wanted to report what the numbers were, and I was curious to see if any power was to be had with custom tuning. So far, the Ford...
|
scott s
|
-
|
Once the Airaid Cold Air was buttoned up, the Hurst Shifter was linked in, & the SLP Skip Shift Eliminator was connected it was time for the final piece of the puzzle - a Computer Tune! Enter the DiabloSport Predator U7194 for 2010 Camaro SS 6.2L LS3 & L99 . This is another one of those simple plug & play mods that makes a world of difference...
|
jmac
|
-
|
Big Brother always wants to have control over us car guys. Kinda like the Skip Shift mechanism built in to the 94-02 Camaro & Firebird, 97-09 Corvette, 04-06 GTO, 2009-2010 Challenger , & more to the point - the 6-Speed 2010 Camaro . Being forced to shift from 1st to 4th is for the birds! Luckily, fellow car guys with brains are around &...
|
jmac
|
-
|
After I finished up the Airaid Kit, it was time to jack up the car & tackle the Hurst Shifter ! Hurst was the first to market with a 2010 Camaro Shifter , & it is a performing beauty. The Hurst Billet/Plus 2 Shifter for the 2010 Camaro SS & RS not only reduces your shift throw by a whopping 44%, it adds a classic look to the interior that...
|
jmac
|
-
|
It's a rare occasion when we actually perform work on a customers car. However, with the 2010 Camaro being so new & us not having much hands on experience with one, we jumped at the opportunity to throw a few parts on one of our long time customers new Camaro SS . He had already purchased an SLP Axle-Back Exhaust from us & installed it before...
|
jmac
|
-
|
My oldest brother called me one day asking me if I could get dash covers for Dodge trucks . He told me as he was visiting my other brother he just happen to look through the windshild and notice the dash in my brothers 2001 Dodge pick up was in terrible condition and was even missing some chunks out of it. We were thinking about getting him one for...
|
mlinley
|
-
|
My 1986 Ford Mustang has been in Texas all its life. It also has Canyon red interior. You can put those together and create a lovely recipe for orange faded seats. Mine had also been worn, tattered and smelled bad, so it was time to pursue new seat upholstery . Here is what you need for this installation: 1x - Mustang cloth upholstery kit 1x - Hog ring...
|
Karson
|
-
|
If any of you Mustang guys happen to wonder how to install a Mustang Mach1 style Chin Spoiler and new 2001-2004 factory tinted headlights on a 1999-04 Ford Mustang, I'm here to tell you how... MUSTANG MACH 1 STYLE CHIN SPOILER INSTALLATION 1. You want to open the box and check your part for any defects before you start... 2. This Xenon brand Mustang...
|
Curtis
|
-
|
Everybody has heard the phrase "If momma ain't happy, ain't nobody happy" right? Well, there are not too many women that work here, but us guys try to take care of the ones that do, so when I heard that Beth in our accounting department was having trouble with the tailgate latch on her 2002 Chevy crew cab truck, I had to see if we...
|
btaylor
|
-
|
So you have racked up a few miles on your new 2010 Camaro SS or RS , you look down and notice that your factory sill plate protectors look like this...rippled, wavy, and ultimately upsetting. Its fair to say that GM did not spend a whole lot of time tinkering with the 2010 Camaro scuff plate protector option, as they are not much more than thick vinyl...
|
joliver
|
-
|
While removing the Door Panels on your 87-88-89-90-91-92-93 Fox Mustang GT or LX is a fairly straightforward process, it may seem a bit daunting to the uninitiated. At some point in time, all Fox Mustang owners will be faced with removing their Door Panels to replace Door Lock Actuators , Power Window Motors , or even to just hang a new set of Door...
|
jmac
|
-
|
Ok, new 2010 Camaro owners, here's one new way to easily customize your new 2010 Camaro and give it killer looks in the process. The Chevrolet factory classic "gold 'n chrome" bowtie scheme on the front grille and rear trunk lid do a good job showcasing the Chevrolet nameplate, but falls short in the aesthetics department. Ditch your...
|
joliver
|
-
|
Mustang Door Lock Actuators are problematic to say the least, especially on the Fox Chassis cars. As I stated in my Top 10 Fox Mustang Restoration Parts Blog , Mustang Door Lock Actuators are typically in one of three conditions. They operate properly, the key still works in the door but nothing happens when you hit the unlock button, or the key won't...
|
jmac
|
-
|
Ford Racing 4.6L 3-Valve Fox Body Swap - Part 1 Ford Racing 4.6L 3-Valve Fox Body Swap - Part 2 Ford Racing 4.6L 3-Valve Fox Body Swap - Part 2.1 Ford Racing 4.6L 3-Valve Fox Body Swap - Part 3 Ford Racing 4.6L 3-Valve Fox Body Swap - Part 4 Ford Racing 4.6L 3-Valve Fox Body Swap - Part 5 If you've been following along, you know that the 4.6 3v...
|
scott s
|
-
|
I've had an itch for another coupe and when I set eyes on this car, I had to have it. No squeaks, no rattles, and a great interior and exterior. Just about everything I have ever dreamed of in a coupe. That being said, as with any fox body, there's a little "to do" list for it. My goal is to make this a show car, and its darn close...
|
Karson
|
|
|