Wanna send a set my way? Black please =]

Nice looking wheels... but those 18s just look HUGE on that foxbody!

i have a fox, i must say im not a fan of 18's on a foxbody. but DAMN these look sexy. any issues with fitment on the notch? i would consider these if i knew they didnt rub or cause driveability issues

I would be interested also as far as fit on the fox.

Alex & Chris:  I have steeda sport springs on the car with 94-95 spindles up front, as well as 2 steering rack limiters per side. This wheel and tire combo did not pose any issues with rubbing on my car under normal driving conditions. Keep in mind that the 91-93 cars have a larger wheel opening in the fender which helps out when putting larger wheel and tire combo's together.  I did not have a chance to do any "spirited driving" with the kit on the car so under hard braking so I'm not sure if there is any problems in that area. In the rear you will have to eliminate the quad shocks, roll the wheel well openings, and possibly clearance the inner fenders with a large hammer.  Each car is slightly different on how much massaging is needed on the inner fender wells, so you just have to adjust where needed.  

Ya'll should definitely offer these in a bronze finish for the 10+ Mustangs!

Those wheels look good!! As far as 18s looking big on a fox i think it all depends on the wheel! My 92 calypso coupe has 19s right now and looks good! Hell I even autocross on 19s!

Thanks goes out the lmr to offer more wheels to the mustang community

Im thinking of putting a set on lowered fairmont.setup for handling.

How much do the 18x9 wheels weigh?

Damn those are nice. But I agree, 18s too big for a fox imo. I'd pick up a set if you had some 17x8s for my SVO for sure.

I have a 2002 with  17,s by 9,s  do they come in 17.

Please tell me that they will make these in a staggered set 18x9 & 18x10 because I've been looking for a set of wheels like these black ones to go on my Dark Shadow Grey Mach 1.  I have the 17" staggered deep dish Bullitts on it now and these are the wheels I've been looking for

Dude where's the convex look and 10" or better widths for the rear... Like the wheel but 9" is not the greatest for the 94-04 crowd

those black wheels look killer on that SN95 but have to agree with sledge hammer with the 9" width up front and a 10" width out back.

id like to see them on a new edge car before i could decide

WOW! These wheels look SICK! I would buy them right now if they had a staggered set

What size for FOX rear wheel ? It's R18" but the rest what they are ??? 40 x 265

I already use 18 inch wheel with 225 35... but they are to small !!!

pleeeeaaase put some matte blacks on a new edge please

Put a set of matte blacks on a white 03/04 Cobra and I might be sold.

WHEN the 18x10 "deepdish" are availible for my 04 Oxford White COBRA are availible I will take a set immediately.

Those wheels are sweet.  Would like to see a set of 19" on my Yellow Blaze Metallic 2011 5.0!!!

You should definately make these in 20x9 and 20x10...

What size tires are you guys running on the 2011-12?? Looks perfect

GAWK!!! they need to make these in a 4bolt

If these would have an 18x10 option with a little bit more concave for a nice staggered look, id be all over them!

any four lug applications 93 fox body?

I know the wheel and tire package comes from LMR already mounted and balanced but what about the TPMS.

I also love the wheels, but have to say, im not going to beat the inside of the fenders on my 89 Sallen #311! Someone with this company should make a 17x9 set. I'm sure they would fly off the shelves for fox body fans... I know I would be buying one of the first sets, if they did offer it! Think about it SVE....Hmmm?

What is the weight on the 18x9?

Any chance of a staggered 18x10 in the rear?

Looking for a 18X10 in satin black to fit a  2008 FR500S  any chance of making them?

Beautiful wheel! Are there plans to offer these as a 17x9, 4-lug application? I'd buy the first set you produce in Bright Silver.

if these wheels were 18x10 in the back,omg i'd be ordering them right now.

can i get them in 24's

hey how you guys doing, are the factory lug nuts good for these rims or is it mandatory that i buy the spline ones as well?thanks in advance

What suspension components on the white car at top? Will 18" clear the brembo brakes?