Ask any 4.0L V-6 Mustang owner and the will have a good reason for choosing their 4.0L V-6 Mustang over a GT. It could be anything from modification potential to lower insurances cost to better fuel mileage. Some like to start small and work their way up, Some like to be waiting for their friends to upgrade their Mustang GTs with parts, only to take ownership of the now-discarded parts! Whatever the reason for 4.0L V6 Mustang ownership maybe, It's clear that potential abounds in whatever direction you choose. Here are some Mustang V6 parts ideas from the January Issue of Mustang Enthusiast magazine, and we thought we would pass them along as a blog! Thanks!
2005-2009 Mustang C&L 4.0L V6 Cold air intake kit
C&L Performance Shown here is there complete cold air intake upgrade system for the 2005, 2006, 2007, 2008, 2009, 2010 4.0L V6 Mustang. With horsepower gains between 15-18 over stock and do not require any computer tuning adjustmentsFor all the V6 Mustang enthusiast C&L has created this excellent cold air intake kit to increase performance and fuel efficiency.
C&L's complete air intake upgrade includes everything to replace the entire air intake assembly from the throttle body forward. This includes 4.0L V6 Mustang specific C&L air inlet tube with hoses/clamps/fittings, an upgrade 83mm CNC machined aluminum mass airflow housing, conical air filter assembly, filter shroud assembly, installation tool and instructions.
When installing this or ANY aftermarket air intake upgrade that replaces the factory air filter and meter assembly, you must make the necessary tuning adjustments to your computer. If not, your air/fuel ratio will run considerably leaner than stock and the vehicle will not operate properly, causing undesirable driving conditions. To make these modifications easier for the end user, we have worked closely with Diablosport to develop a C&L specific Predator tuner which comes pre-loaded with all of the tunes necessary to support all of the existing computer box codes in the 2005,2006,2007,2008,2009 4.0L V6 Mustangs.
Click here for a full listing of Mustang cold air intake kits, elbows and inlet pipes
----------------------------------------------------------------------------------------------------------------------------
BBK throttle body for 2005,2006,2007,2008,2009 Mustang 4.0L V6
With the popularity of performance parts for the Mustang 4.0L V-6, its easy to see why these Power Plus series throttle bodies from BBK have become a must have with Mustang owners. Engines benefit from increased airflow, and this throttle body is true to make that increase happen. Putting 10 more ponies in your system, this 70mm throttle body will increase airflow to your 4.0L Mustangs engine, giving you the horsepower boost you want, at a price you can afford. As with all of our Mustang BBK throttle bodies, this is cast from high-quality 356 aluminum alloy and CNC machined so that you can get that perfect fit without having to modify any part of your new item! This BBK brand throttle body reuses the stock factory throttle body gasket.Nothing beats Mustang V6 performance parts from BBK!
Includes:
Double-sealed Bearings
O-Ringed Throttle Shafts
Precision Die-Stamped Linkages
All Necessary Hardware for Installation
Click here for a complete listing of all Mustang V6 and V8 GT throttle bodies, spacers and gaskets
----------------------------------------------------------------------------------------------------------------------------
Handheld Programmer/Tuner 2005,2006,2007,2008,2009 Mustang 4.0L V-6
Next and one of the most popular upgrades for your V6 or V8 GT Mustang is a handheld performance tuner like this one from Diablosport. Adding a tuner/programmer to your 4.0L Mustang will allow you to fine tune the new additions that you have added to your 4.0L V6 Mustang. It really is as easy to tune your car as it is to hook up the latest gaming system to your TV!
Here is an example from Diablosport
Stock Mustang Tunes:
Performance Tune for 93 octane
Performance Tune for 91 octane
Performance Tune for 87 octane
Specific Mustang Tuner Features:
Dual timing adjustment points (2000-4000 RPM / 4000-7000 RPM)
Timing table (+10% / -40%)
Dual fuel adjustment points (2000-4000 RPM / 4000-7000 RPM)
Fuel table (+40% / -15%)
Idle (+/- 20%)
Global Timing adder -6 degrees /+4 degrees
Raise Speed Limiter
Rev Limiter
Re-Calibrate Speedometer for Gear and Tire Size Changes
RPM Shift Points, adjustable via MPH
Cooling Fan ON/OFF Temperatures
MAF curve adjustment
Internet Updateable.
Click here for a complete listing of Mustang 4.0L V6,GT and Cobra programmers and tuners
----------------------------------------------------------------------------------------------------------------------------
When it comes to stylish body parts there is no reason a 4.0L V6 Mustang has to be "plain jane". One of the most stylish Mustang parts that can be added to your 2005,2006,2007,2008,2009,2010 Mustang 4.0L V-6 or GT is a Mustang black out trunk panel or Honeycomb truck panel. There are many to choose from, but here are some of the more popular styles.
Mustang trunk panel from Classic Design Concepts
Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained 2005,2006,2007,2008,2009 Mustang Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE Mustang gas cap.This 2005,2006,2007,2008,2009 and 2010 Mustang Smoked rear blackout panel is made from durable molded acrylic, and this Mustang Styling Blackout panel mounts over your factory deck lid without drilling for a quick installation. It comes in a great looking smoke finish for a stealthy blackout look.
GTS blackouts for 2005,2006,2007,2008,2009
GTS Mustang black out panel for 2010 Ford Mustang
Make your 2005,2006,2007,2008,2009 and 2010 Mustang stand out in the crowd! This heritage style blackout panel covers the rear decklid between your taillights to give your V6 Mustang a great classic look! Magnetic backing allows for a quick and easy installation. Hole for rear Mustang pony emblem is already cut out!
And for a full listing of all our trunk panels
2005,2006,2007,2008,2009 Mustang 4.0L V-6 ang GT magnetic black out panel
2010 Mustang 4.0L V-6 and GT magnetic black out panel
----------------------------------------------------------------------------------------------------------------------------
Mustang V6 Vortech supercharger's
For 4.0L V-6 owners in search of maximum power and performance are turning to Vortech. The Vortech supercharger system available for the 2005,2006,2007,2008,2009 and 2010 Mustangs bring a substantial increases over factory horsepower and torque numbers.
The 2005,2006,2007,2008,2009 Mustang V6 comes from the factory with an impressive 210 horsepower and 254 lb./ft. of torque. This Vortech supercharging system can safely increase this to 290 horsepower and 294 lb./ft. of torque.*
High Output Supercharging Systems:
The increased boost level, high output supercharger system, features a fully integrated air to water aftercooler approach to charge cooling. This system will increase horsepower from 210 to 330 and will increase torque from 240 lb./ft. to 337 lb./ft.* So yea u can have the GT's play with you!
Quality Features:
- Systems are available with the V-3 self lubricating supercharger. No oil lines necessary.
- Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
- Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
- Fuel management upgrade includes high-capacity replacement fuel injectors and a DiabloSport Predator hand-held programmer to re-flash the factory processor
- Integrated air/water, dual-pass charge cooler configuration allows for additional horsepower gains and features maintenance-free design(High output systems)
- Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions
- Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
- Billet aluminum mounting bracket for "factory-type" appearance and rigidity
- High-flow bypass valve provides surge-free compressor operation
And for a full listing of Mustang V6 and Mustang GT Mustang SVT Cobra superchargers you can find, click here
----------------------------------------------------------------------------------------------------------------------------
Ford Racing V6 Power Pack
Approximate increase of 15 peak hp / up to 17 lb-ft over stock for your 2010 V-6 Ford Mustang
Kit includes:
- Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel
- High-Flow K&N / Ford Racing washable Air Filter M-9601-MV6
- True Dual Exhaust with X-Pipe and FR500S Performance Mufflers
- Performance Oil Filter M-6731-FL82
- Premium (91 octane or higher) fuel only
Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase.
Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor.
Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal and eligible for limited warranty when installed by a Ford or Lincoln-Mercury Dealer.
For 2005,2006,2007,2008,2009 Ford Mustang 4.0L V6
----------------------------------------------------------------------------------------------------------------------------
2005,2006,2007,2008,2009, and 2010 Ford Mustang Ford Racing 4.0L V6 Mustang Exhaust system
Unlike the competition, some Mustang Ford Racing upgrades and crate motors are 50 State Street Legal and covered under WARRANTY when Ford or Lincoln Mercury Dealer installed and certain conditions apply. See www.fordracingparts.com for warranty information.
*Fits 2005-2006-2007-2008-2009 4.0L V-6 Mustang
*2008 OE Bullitt axle-back
*Louder, "throatier" exhaust note
*Includes X-pipe
*Requires minor modification of rear bumper cover
*50 state drive-by street legal (E.O. #D-598)
See www.fordracingparts.com for the most up-to-date warranty information.
Click here for a complete listing of Mustang exhaust, cat-backs, axlebacks and hardware
----------------------------------------------------------------------------------------------------------------------------
2005-2010 BBK Mustang Chrome V6 shorty headers
2005,2006,2007,2008,2009 and 2010 Mustang 4.0L V6 BBK shorty headers.
Mustang V6 shorty headers are very similar to the stock Mustang exhaust manifolds that come from the factory. These V6 Mustang headers are designed for maximum flow in a small area. A set of BBK Shorty Mustang Headers for your V6 are a great way to get your mustang breathing better. Latemodel Restoration Supply now offers the BBK Chrome Shorty Headers for your 2005,2006,2007,2008,2009 and 2010 V6 Mustang. These BBK Shorty headers for your Mustang 4.0L V6 are manufactured with 1 5/8" CNC mandrel bent tubing for unrestrictive airflow and piece laser cut 3/8" flanges for added strength and durability. And to ensure leak free performance BBK pressure test all their headers before they ship. BBK designed and dyno tested these headers for maximum performance. These BBK CNC Series Chrome headers for the Ford Mustang V6 are a direct bolt on with all gaskets and hardware included.
Click here for a full listing of our V6 and V8 Mustang shorty, and longtube headers
----------------------------------------------------------------------------------------------------------------------------
Mustang GT style front grille for 2005,2006,2007,2008,2009,
So don't let the Mustang GT's have all the fun! Upgrade the front of your V6 Mustang with this GT style grille conversion kit. Grill is molded specifically for your V-6 Mustang bumper cover to provide an OE like fit & finish. Includes Mustang grille, Mustang fog lights, Mustang wiring harness, Mustang headlight switch, & instructions. The Mustang GT style grille reuses your factory Pony. This is a great upgrade to any V-6 Mustang!
----------------------------------------------------------------------------------------------------------------------------
Mustang V-6 GT style center fog grille for 2005,2006,2007,2008,2009,
Street Scene Equipment, an industry leading manufacturer of high quality styling components and accessories, has announced the release of their replacement center light grille shells for the 2005,2006,2007,2008,2009 V-6 Ford Mustangs.
Part Number SSE-95073600 is a Center Dual Light style replacement grille that locates two 4"driving lights at the center of the grill similar to the Shelby Mustangs that were so popular in the late 1960's. This grille comes with grille shell, two 4" driving lights, wiring harness and all hardware necessary for an easy installation. SSE-95073600 is constructed out of injection molded plastic and utilizes the factory mounting locations and requires no cutting or fabrication to install. This kit will add a muscular look to your V-6 Mustang.
Click her for a listing of all 2005,2006,2007,2008,2009,2010 Ford Mustang grilles
----------------------------------------------------------------------------------------------------------------------------
Classic Design Concepts Shaker system for 2005,2006,2007,2008,2009 Ford Mustang V-6
CDC's 2005,2006,2007,2008,2009 Mustang V-6 SHAKER SYSTEM is now available. This Ram Air/Cold Air Package includes all the duct work to make it fully functional. The Mustang V-6 Shaker System includes an Engine dress up cover, Cast Aluminum Scoop and all the necessary hardware, instructions and templates. In addition CDC has engineered water management systems within the shaker ductwork. The CDC Shaker System uses the factory air box so Engine flashing is not necessary. The CDC Shaker System also comes standard with a High Flow/High Performance S&B Filter. The Shaker System will use your factory hood which has a factory stamping in the hood inner, which accommodates the shaker system installation process, while maintaining the integrity of the hood.
Click here for a complete listing of Mustang shaker systems from CDC
----------------------------------------------------------------------------------------------------------------------------
Agent 47 Race Mirror 2005,2006,2007,2007,2009 Ford Mustang
These Mustang mirrors from Agent 47 capture the classic look and aerodynamic goodness of the original racing mirrors of the 60's but with full power. This is the style mirror that belongs on your 60's retro inspired mustang. These mirrors use the stock mounting locations and connectors for a quick and hassle free installation. The 2005,2006,2007,2008,2009, Mustang Mirrors come with new glass and backing plates. (mirrors sold without motors, We recommend using your stock motors.)
Molded in black satin finish but are paintable match your Mustang V6 or GT.
Click here for a complete listing of Mustang Door mirrors
----------------------------------------------------------------------------------------------------------------------------
MPG Caliper covers for 2005,2006,2007,2008,2009 and 2010 V6 Mustang
Well we would all love to go out and buy a $1,300.00 + brake kit, But it's not always on the budget! One way out is to go with a set of MPG brake calipers. They are stylish and do serve a purpose. I am not going to lie, Like my personal truck is all show and no go! and I am rocking the MPG caliper covers and LOVE them. So here is a little information that I got from their website.
Add Distinction to Your Ride Caliper Covers Fits 1993-2010 Ford Mustang MGP Caliper Covers •
.Reduces Brake Dust
.Powder Coated Finish
.6061-T6 Aerospace Aluminum
• Big Brake Look
• Easy Installation
• No tape, glue, paint or special tools required • Patented
.Patented Fastening System Engineering Excellence
• TIG Welded
.High Speed Engraved Characters
.Hydraulically formed • Easy Install, Approx 10 Minutes Per Wheel
•Easy Install, Approx 10 Minutes Per Wheel
Click here for a full listing of our Mustang V6 and GT caliper covers from MPG
----------------------------------------------------------------------------------------------------------------------------
2005,2006,2007,2008,2009 and 2010 Mustang wheels
Nothing set's off your Mustang like a new set of wheels and tires. Latemodel Restoration Supply offers a large selection of wheels and parts for your 4.0L V6 Mustang, Mustang GT and Mustang Cobra. This is one of our most popular wheel and tire kits that we offer. And they are exclusive to us! There are other companies that offer and 10th anniversary Mustang cobra wheel but we took our time to make them look the way we wanted. We offer these Mustang 10th anniversary cobra wheels in Black, Chrome, Anthracite, and Bronze and in all sizes. 17x9/17x10.5 and 18x9/18x10 can make your V6 Mustang look killer!
There are just to many Mustang V6 parts that we offer that we were just not able to get in to this blog. Anything from 4.0L V6 Mustang performance, to styling accessories and full interior chrome and billet. If you would like to stay up to date with all ofour Mustang parts, please sign up for our news letter and we will keep you up to update with weekly emails www.latemodelrestoration.com
Thanks for talking the time to read our Mustang V6 parts and ideas blog!