It's a rare occasion when we actually perform work on a customers car.  However, with the 2010 Camaro being so new & us not having much hands on experience with one, we jumped at the opportunity to throw a few parts on one of our long time customers new Camaro SS.  He had already purchased an SLP Axle-Back Exhaust from us & installed it before he came in for this next round of mods.  He went for the gusto & purchased an Airaid Cold Air Intake Kit, DiabloSport Predator Programmer, SLP Skip Shift Eliminator, & a Hurst Billet-Plus 2 Shifter.  The instructions for all these parts are very well laid out & easy to follow so I wont bore you with all the details, just a brief overview of each part in 4 separate installments

Lets start off with the Airaid Cold Air Intake System 250-243 for 2010 Camaro SS 6.2L V8.  After opening the box & laying everything out, I knew that this was going to be a quality part, easy install, & a factory type fit.

Looking at the factory inlet system on the ground & theen looking at the huge throttle body, it's easy to see that there is some improvement to be made!

Like I said earlier, the instructions in the kit are great.  The only part that tested my patience was installing the rubber seal on top of the air filter housing.  I'm a bit of a perfectionist & it took me a couple of times to get it on there the way I wanted.  Other than that - easy, cheesy!

The owner of the car was very pleased with the finished product & has called back several times just ecstatic with the way the car now runs (we also did a tuner at the same time, more on that in another installment).

For the money, the increase in performance, & the improved underhood looks this is a hard mod to beat.  See below for a link to the full instruction sheet!

Airaid 250-243 for 2010 Camaro SS Installation Instructions

Mod Frenzy Part 2! 2010 Camaro SS Hurst Shifter Install

Mod Frenzy Part 3! 2010 Camaro SS SLP Skip Shift Eliminator Install

Mod Frenzy Part 4! 2010 Camaro SS Diablosport Predator Tuner/Computer Programmer