We all know that the 96-97-98 Mustang GT 4.6L 2V needs all the help it can get.  The PI Head equipped 99-00-01-02-03-04 Mustang GT 4.6L 2V is a much more potent setup, but it still falls short of it's 4.6L 4V bretheren as well as those LSX guys.  What is a Mustang Owner to do?  If you're in to quick, easy, cost effective upgrades then you need to spray it! 

Nitrous Outlet stepped up to the plate (pun intended!) for you 96-97-98-99-00-01-02-03-04 Mustang GT 4.6L 2V owners with their awesome new Mustang Nitrous Kit EFI Plate System.  This Mustang Nitrous Wet Kit contains all the core components needed for installation on your Mustang GT.  Lets cover the main kit contents starting with the bottle.

• The Nitrous Bottle included in this Mustang Nitrous Kit is of the 10lb variety & is covered in a gloss black powdercoat.  The chromed Bottle Valve has a 45 degree outlet & will support up to an 800 horse shot!  The Bottle Valve also features two 1/8" NPT ports in the side that allow easy additions of Nitrous Pressure Gauges or Nitrous Pressure Sensors.  The Nitrous Bottle is held in place with dual Stainless Steel band type Bottle Brackets.
• A CNC Machined Stainless Steel Body is the basis of the Solenoids used in this Mustang Nitrous System.  The heavy duty coils are encapsulated in Epoxy to resist the elements & vibration while the Solenoid lead wires are 14 ga. stranded wire with color coded insulation.  The Nitrous Solenoid features a .125 orifice, a 1/4" NPT inlet, an 1/8" NPT Purge Port for that nifty Nitrous Purge Kit, & a 1/8" NPT bottom outlet.  The Fuel Solenoid features a .187 orifice & an 1/8" NPT inlet & outlet.  Both Solenoids will support a 400 horse shot.
• The Nitrous Jets & Fuel Jets included in the Mustang Nitrous Kit are CNC Machined from Brass with precision ground orifice for the utmost in accuracy.  3 sets of Jets are included in the Nitrous Kit that allow for increases of 50, 100, & 150 horsepower.
• The Billet Aluminum Fuel Rail Adapter makes it super easy to tap in to your fuel system for adequate fuel supply for your new Mustang Nitrous System.  It is CNC Machined for a perfect fit & black Anodized for long lasting good looks.
• The star of the show, the Nitrous Plate, is a work of automotive art.  It is CNC Machined from a Billet Aluminum & is Black Anodized for a lasting good looking finish.  It is machined to accept the factory type o-ring gasket for an OE leak-proof seal.  Delivery is achieved via 6 Nitrous Ports & 6 Fuel Ports for maximum flow capability & the ultimate in Atomization.  This plate will support up to 400 horsepower!

This 4.6L 2V Mustang Nitrous Kit Plate System also includes all the braided lines, fittings, brackets, switches, relays, connectors & hardware you'll need for a basic installation. The kit is adjustable from 50-150 horsepower, but what if 150 horses not enough for you?  Not a problem!  The stainless braided lines, black anodized billet aluminum plate & super duty solenoids included in this Mustang Nitrous System will support up to a 400 horsepower shot, if your fuel system & engine are up to the task, & all you'd need to do is order up a new set of jets.  (Don't be stupid, having a properly built engine & adequate fuel system along with a solid computer tune are all absolute necessities for horsepower increases over 150hp.)

As you can see, this kit just may be the answer you've been looking for to get your 4.6L 2V Mustang kicking some 4V & LS butt!  Go from Zero to Hero with the help of Latemodel Restoration Supply & Nitrous Outlet today!