This Blog

Syndication

Welcome to MyLRS Sign in | Join | Help

N/A items from Ford!

Share |

There have been many well needed parts that have been discontinued from Ford over the years. 

Share with us your top five most needed Fox body parts that are no longer available. Below are a couple of the most requested parts that are not available.

 1987-93 Mustang Quarter Windows

1987-93 Mustang HVAC Control Panel


Published Oct 22 2007, 03:49 PM by ckasik
Filed under:

Comments

 

Matt said:

Leather Seats is up there and probably wheels.

October 24, 2007 12:28 AM
 

ckasik said:

We carry the actual leather seating upholstery and seating foam.  If you have the seat frame then your set.  Why type of wheels are you looking for?  Thanks for your response..

October 25, 2007 10:01 AM
 

Kevin said:

1987-1993 Map Pockets, particularly Opal Gray

Ford CD Player. This came in my 1993, but I believe it was also available in the earlier 90s cars.

October 25, 2007 11:52 AM
 

ckasik said:

Hey Kevin I wish I could help you on the cd player but I can't.. What I can help you on are these map pockets.. We now carry door panels that include these pockets..I think the only colors we carry at this time are scarlet, smoke, black, and titanium.  You can always use spray dye to correct the color issue... Check out our site and see what you think about them!

October 25, 2007 3:13 PM
 

rednotch said:

93 cobra intake plaques.....

October 26, 2007 2:16 AM
 

Harvey said:

The Cover under dash of drivers side that covers all the wiring. from the edge to the firewall . Made of heavy material. Sorry i do not know what to call it

October 27, 2007 2:08 PM
 

Tim said:

It would be nice if there was a reproduction of the plastic gauge surround.  The piece that the headlight and hazzard switch mount to.

October 30, 2007 1:15 PM
 

Tim B. said:

I'd love to see new interior plastic for around the hatch area on my 87.

October 30, 2007 5:28 PM
 

Derrick said:

Sunroof parts for the my 92 LX.  Found a few items for them but not what I need.  Can't get them from Ford anymore and the salvage yards are dry.

November 6, 2007 8:59 AM
 

Rayn said:

In response to Kevins question on the Ford CD player.

I used a cd player out of a contour that fits perfectly and looks stock. I believe many middle 90's used this same player, Windstar comes to mind.

November 6, 2007 10:54 PM
 

Todd said:

I agree with Tim B, The plastic that run along the inside area of the hatch and also the plastic on each side of the rear seats.

November 7, 2007 12:52 PM
 

john said:

some marchal fog lights for the 4 eyes would be nice

November 13, 2007 3:55 AM
 

Robert said:

It may not be real critical yet but there does not seem to be a source for convertible top power switches on fox bodies. I was only able to get used through ebay when mine broke.

November 14, 2007 2:50 PM
 

Robert said:

Another thing that really bothered me was when my factory tachometer went south and would be stuck half way. I was only fortunate to find one on ebay alone because there are only complete clusters for sale and there is no telling when the tach from a used cluster will fail as well. It seems to be fairly common when I did research. Perhaps they could be refurbished?

November 14, 2007 2:54 PM
 

Alberto said:

I know this is from 87 to 93, but the 1979 bumper cover is a real pain. I really wish someone to build a repro soon!

November 16, 2007 8:13 PM
 

josh said:

engine dress up kits for the 84-86 svo

November 20, 2007 7:19 PM
 

Levi said:

Passenger side outer marker light and lower control arm with a serviceable ball joint that doesn't require a coil over kit.

Thanks for all the parts you guys already have for us fox body guys!

November 23, 2007 10:09 AM
 

Inge said:

Ford discontinued a number of different pigtails for the 87-93 fox. Ignition coil pigtails, O2 pigtails, and few others. The hardest to find is the MAFS pigtail. Had to pull mine off an old Mercury Grand Marquis. The plastic gets too brittle and they break often enough to need someone to have them in stock.

December 1, 2007 11:58 AM
 

harvick said:

I also would be interested in the rear hatch interior plastic, also the cargo cover mounts, and cargo covers.

Actually all interior plastics would be great. Just imagine how many you could sell in BLACK!!!!! That would make a true Back to Black kit!

December 6, 2007 6:47 PM
 

Andy said:

what you really cant find are the plastic pieces that go around the convertible top on most fox body mustangs, the ones on my car somebody put like buttons on em and made a custom convertible top boot, i have found some convertibles in junk yards but you cant even take them off, they always crack or the bolts break off and the ones that are being made are so expensive

December 10, 2007 5:58 PM
 

Jason said:

The vacuum line assembly that is found by the passenger side strut tower would be very popular if reproduced.  I'm referring to the block of vacuum lines that connect to such things as the EGR valve, AIRB and AIRD valves, etc.  The vacuum lines get brittle with age and break, and after being spliced countless times with bits of rubber vacuum hose, look unsightly.  Having a complete reproduction available, perhaps even including the rubber distribution block would be excellent.  The problem is exacerbated because Ford never had this available as a replacement part from the get go.  Most mustang owners don't want to have to go to the trouble of buying the vacuum tubing, heating it up in a pot, and bending it to the needed shapes.  I, personally, would be willing to pay a fair amount of money for such a reproduction.  Thanks.

December 14, 2007 6:42 PM
 

Shannon said:

Interior Hatch plastic

December 18, 2007 1:12 PM
 

Robert Smith said:

I would like to see some sideskirts made for the Fox Mustang GT with the Mustang GT text on them. I would also like to see the interior quarter trim panels for convertible Fox Stangs( 87-88 without speaker grill)

I also have a 91 GTso, I agree with the interior plastic for the hatch Cheese grater tail lights. Dash pads for 87-93 in your standard colors as well as seatbelt kits.

    I could go on and on but, I think these are some of the things that most fox owners are looking for. Oh! One more, 140mph speedo for 87-88 stangs.

January 19, 2008 10:33 AM
 

carter said:

interior hatch plastic..one of the hardest things ever to find in descent shape..let alone find new! so definitely interior hatch plastic..and does anybody know a body shop that carries the rear fenders and roof section metal or whatever?? its all welded into one piece aint it??   :(   need parts!!!!

February 4, 2008 9:00 PM
 

Johnny said:

the outer metal piece on the sunroof of the fox bodies.  seems all the ones i see the bolts have pulled through the metal, causing water to leak in behind the center console in the backseat.  i think this piece needs to be made ASAP.  

March 19, 2008 9:23 PM

About ckasik

My interests are music, sports and cars. Ive owned several different vehicles ranging from a 69 chevelle to a 04 Dodge Srt10. I have a one year old son and a beautiful women that are both the joys of my life.